Plastic Bottle Blow Moulding Machine/Small Bottle Blow Molding Equipment/Bottle Rotary Blow Making Plant
Simple operation and high control precision
AK bottle blow unit is equipped with specially designed PLC control system. It controls the whole bottle production process through a soft touch pad with time control precision up to 0.01 second.
High quality pneumatic unit
Pneumatic unit provides power for machine movements including machine driving and bottle blowing. AK-32 is equipped with world famous brand components (Festo) to reduce the noise save energy and produce the high quality production.
Reliable designed clamping system with perfect performance
AK-32 adopts three-plate toggle clamping system to provide powerful clamping force required by high pressure blowing up to 35 bars. Besides the system has an adjustment device to change the distance between front & middle mold-plate and the position of stretch-seal cylinder required in different mold installation.
Plenty of assistant units
AK-32 PET stretch blow moulding machine has a plenty of assistant units to increase the machine's performance such as air storage unit to keep the air pressure stable grease-lubricating unit to reduce mechanical parts' wear and tear and multi-utilization air entry unit to meet air compressed air high-pressure single entry mode and high-pressure & low-pressure double entry mode.
Reliable safety unit
AK-32 has a plenty of assistant unit to increase the machine's performance such as air storage unit to keep the air pressure stable grease-lubricating unit to reduce mechanical parts' wear and tear and multi-utilization air entry unit to meet air compressed air high-pressure single entry mode and high-pressure & low-pressure double entry mode.
Reliable safety unit
In order to keep both machine and operator safe AK-32 installs twin startup switches on two sides of the machine which should be pressed at the same time to start the machine while there is also an emergency stop button on AK-32 to stop machine urgently if necessary.
Powerful heating capacity with perfect heating result
AK series preform heater adopts infrared lamp as heating unit. Infrared has powerful thermal-radiation capacity which can heat up preform to required temperature in a very short time while the strong thermal-penetrability provides continuous and uniform heating inside of preform and over surface of preform.
Independent heating control system
AK series preform heater adopts independent temperature control unit for each heating zone to offer ideal temperature for various preform. Each heating lamp has a voltage regulator to control the voltage of the heating lamps and keep it working smoothly. With the LED display it becomes easy and convenient to inspect and adjust the voltage value.
Perfect cooling design
AK series preform heater is equipped with air-cooling and water-cooling device to remove the remained heat on preform loader and prevent preform neck from deformation. And reliable air exhaust system placed on the heater keeps heating temperature continuous and stable during preform heating process.
Multi adjusting device
Multi adjusting device placed on the preform heater increases the machine's agility. With those devices the heating channel's width and height can be changed easily according to the different neck size and neck height. The mouth of the air exhaust system is also adjustable to meet different heating requirement.
Assistant unit for easy operation
For easy operation AK series preform heater is equipped with plenty of assistant units including centralized cooling water supply system portable base unit for machine's convenient moving reliable air entry unit and so on which makes operation simple and convenient for customer.
1. Produce bottle from 0.1L to 6L(1 cavity)
2. Output capacity up to 850 for 0.1L using two-cavity blow mold
3. Advanced PLC control system with a use-friendly panel and time-control precision of PLC up to 0.01second
4. Equipped with special designed air storage unit
5. Using Infrared preform heater
6. Independent Temperature Control for different heating lamp to get ideal preform heating results
7. Heating lamps are adjustable in directions to suit various preforms.
8. Operated only by one person without special training.
9. Simple installation & startup adjustment.
10. Waste rate of finished bottle is less than 0.3%